HTC Superfloor™
HTC Superfloor™
utilizes an innovative grinding and
polishing system which includes both
metal bond and resin bond diamonds to
bring out the natural beauty in your
concrete floors. HTC Superfloor™
produces a highly reflective surface
finish that is not only aesthetically
pleasing, but reduces maintenance costs
and increases durability.
Click here for the HTC Superfloor Color
Chart
What Makes HTC Superfloor™
the Best?
Functional
-
Dense, polished surface helps
protect against absorption of
oil and other contaminants.
-
Resists tire marks from fork
trucks and other traffic
-
Harder and stronger than other
floor finishes
-
40% more abrasion resistant than
unfinished concrete
-
20% increase in impact
resistance than unfinished
concrete
-
30% increase in ambient light
reflection from unfinished
concrete
-
Flatter, more level surface
-
OSHA recommends that you achieve
a static coefficient of friction
(SCOF) of 0.5 for polished
surfaces- HTC Superfloor™ SCOF
wet: .50 / dry: .58
-
Easily add color to existing
concrete during the HTC
Superfloor™ process.
Ecological
- Dry,
dust-free grind filters out 99.9% of
all airborne dust
- No
VOC’s
- No
coating, urethane, waxes or topical
coatings applied
- No
slurry
- No
protective gear such as ear plugs,
masks, or retardant proof clothing
necessary.
- New
water-based dyes for environmentally
friendly coloring.
Economical
-
Lower initial costs compared to most
other floor coverings
- No
down time waiting on chemical
processes to cure
-
One-time application with minimal
maintenance
-
Lower maintenance costs with less
wear on cleaning equipment and
consumables
- Long
life cycle of 5-10 years
Simple cleaning
and maintenance, done correctly, are all
that's required for a long-lasting HTC
Superfloor™. Due to its resistance
to tire marks and other contaminants,
the floor only needs a light cleaning
from time to time. and a light polishing
every three years. HTC Superfloor™
never requires harsh chemicals to clean
or strip the surface like some other
processes - and over a 20-year period,
Superfloor™ costs a fraction of what
vinyl, tile or coatings cost to
maintain. Every day, sweep the
floor with a dust mop or fine bristle
broom to remove surface debris such as
sand and dirt.
Cleaning and Maintaining a
Superfloor™
-
1.Remove
Debris-
Areas must be cleaned
daily using either a dust
mop or fine bristle broom to
remove sand and debris that
may scratch the surface.
-
Use CLEANER-
Clean the polished concrete surface with a mop or autoscrubber (make sure
that the equipment
is in good working order).
If using
autoscrubber, combine with
TWISTER™
for maximum results and
aesthetics.
-
3.Restore-
After extensive traffic
and/or poor maintenance
procedures, your polished
concrete may lose
some of its luster.
The best way to restore it
is to follow the TWISTER™
Cleaning Program.
If
the floor was too poorly
maintained and is rough and
pitted, re-polish the floor
with diamond tooling.
-
4.Protect-
For added protection, apply
HTC Stainguard™.
Apply a very thin
coat with a wax applicator
or with an airless pump
sprayer.
|
